Giant P217 User Manual

SeriesP200AUpdated 6/00Triplex CeramicPlunger PumpOperating Instructions/Repair and ServiceManualFor Models:P217P218P219P220P221P223Contents:Installat

10Exploded View - P200A Series

11P200A SERIES REPAIR KITSPlunger Packing KitPart # 09164 (Excluding P223)Item # Qty. Part # Description23 3 08477 V-Sleeve, weep23A 3 08087 V-Sleeve,

12NOTE: Always take time to lubricate all metal and nonmetal parts with a light film of oil before reassembly.This step will ensure proper fit, at the

13Reassembly sequence of the P200A series pump1) If oil seals (19) were removed, replace with seal lip towards crankcase. Lubricate seals before rep

14PUMP SYSTEM MALFUNCTIONMALFUNCTIONThe Pressure and/orthe Delivery DropsWater in crankcaseNoisy OperationRough/PulsatingOperation withPressure DropPr

15NOTESP200A DIMENSIONS (inches)

GIANT INDUSTRIES LIMITED WARRANTYGiant Industries, Inc. pumps and accessories are warranted by the manufacturer to be free fromdefects in workmanship

2INSTALLATION INSTRUCTIONS4. Use of a dampener is necessary to minimizepulsation at drive elements, plumbing, connec-tions, and other system areas.

3P217A HORSEPOWER REQUIREMENTSRPM GPM 1000 PSI 1500 PSI 2000 PSI 2500 PSI*1725 1.7 1.2 1.8 2.4 3.03000 3.0 2.1 3.1 4.2 5.23200 3.2 2.2 3.3 4.4 5.53450

4NOTE:In order to drive the pump from the side opposite the presentshaft extension, simply remove the valve casing from the crank-case and rotate the

5SpecificationsModel P219ANOTE:In order to drive the pump from the side opposite the presentshaft extension, simply remove the valve casing from the c

6SpecificationsModel P220ANOTE:In order to drive the pump from the side opposite the presentshaft extension, simply remove the valve casing from the c

7SpecificationsModel P221AVolume ... Up to 2.21 GPMDis

8SpecificationsModel P223AVolume ....... Up to 3.0 GPMDisc

9ITEM PART NO. DESCRIPTION QTY.16A 06562 Plunger Base (P223 Only) 316B 08455 Plunger Pipe (Excluding P223) 316B 07778 Plunger Pipe (P223 Only) 316C 0